Universal sports ground dimensions. "Sportoborudovaniye" — Manufacture and installation of sports grounds and equipment

The modern development of the sports and recreation industry creates the need for development modern complexes taking into account the emerging needs of the population in various sports.

The advantage of this sports facility that any visitor will find something to their liking, whether it be a child or an adult, young or old, trained or novice athlete.

The main objective of the implementation of this project is the widespread popularization of sports in its various segments:

  • School and student sports;
  • Improving physical education;
  • Corporate sports;
  • Sports of veterans;
  • Mass and yard sports;

Adaptive sports (for persons with disabilities).

Geography of the object

The device of the considered multifunctional site for all-season use is not tied to a specific region or federal district, its placement is possible both in the existing and in the planned residential, recreational and public and business buildings.

Landscaping

Landscaping of the territory of the multifunctional site provides for the arrangement of lawns, planting shrubs and trees, as well as walking paths printed or tiled. There is also a guest parking lot for temporary storage of personal vehicles of students, spectators and service personnel for 15 parking spaces (According to SP 42.13330.2011 Urban planning. Planning and development of urban and rural settlements). The improvement of the territory provides for the accessibility of people with limited mobility.

Taking into account that in this concept a typical draft design is being considered without linking it to the terrain, in the future, when designing, it will be necessary to take into account, first of all, the following factors:

  • the area of ​​the site for the placement of a multifunctional site should be at least 0.4 hectares;
  • engineering-geological, engineering-environmental and engineering-geodetic surveys;

A multifunctional site must comply with the requirements of the urban planning code, as well as territorial urban planning standards.

  1. Universal sports ground 60x30m;
  2. Tribunes for 128 seats;
  3. Refrigeration equipment;
  4. dressing room;
  5. rental premises;
  6. Boxes for players;
  7. Covered bike parking;
  8. Parking for 15 cars;
  9. Warm-up zone;
  10. Workout area;
  11. Zone of street simulators;
  12. Climbing wall 3 m high;
  13. Inventory;
  14. Marking for running at a distance of 30 and 60 m, as well as shuttle running.

The all-season multifunctional playground is designed for sports of all categories of the population and may include the following possible uses:

Main purpose:

  • organization of the training and competitive process in team sports (hockey, basketball, volleyball, mini-football, tennis);
  • public skating on skates;
  • figure skating;
  • game types sports for people with limited mobility (sitting volleyball and wheelchair basketball, gorodki, wheelchair cross, sledge hockey);
  • general physical training classes.

Additional appointment:

  • holding various mass sports events(fitness conventions, master classes, relay races, outdoor games, etc.);
  • holding youth and children's specialized sports events, etc.;
  • preparation for passing the standards "Ready for Labor and Defense" (TRP): Running 30, 60 m, running 1.5, 2 and 3 km, long jumps, pull-ups, etc.

To provide the sports ground with independence from weather conditions (snow, rain, sun, etc.), a stationary canopy is provided above it. This solution will make the operation of the facility stable and predictable, not dependent on weather conditions, as well as extend the season of the rink (in winter) and maintain the ice surface (surface of the sports ground) in proper quality.

Street skating rinks (sports grounds) with artificial ice it is advisable to operate seasonally, approximately from November to March ( middle lane Russia), because it is during this period that the most favorable weather for the operation of the ice rink stabilizes, the greatest activity of citizens and interest in winter sports and entertainment are manifested, which means that the costs of maintaining and operating the ice rink will be optimal.

For efficient and cost-effective profitable exploitation it is recommended to use the facility year-round, i.e. arrange ice rinks(sports grounds), combining them with flat sports grounds from April to October. In winter - ice rink, and in summer - a mini-football field, volleyball or basketball court, tennis courts.

The main characteristics of the canopy over the site

The design of the canopy is a prefabricated metal arched truss on metal columns coated with polycarbonate or galvanized sheet.

Built-up area 2,275 m² (65x35 m²), ridge height 11.52 m. Polycarbonate 16 mm thick and area 2,405 m². The approximate weight of the structure is 110 tons.

Note: More precise characteristics (cross-section of the truss and columns, weight, type of foundation and its depth) of the canopy structure are determined directly when designing for a specific area.

The design of the cover for ice (winter period) and for summer cover may be different depending on the selected option for ice preparation technology.

The multifunctional sports ground is a complex of structures, including a covered universal sports ground measuring 60x30 meters, fenced with hockey boards, with spectator stands for 128 seats and places for substitute players, and an open area for general physical training.

One-time maximum throughput:

  • winter period- 110 people/shift (mass skating);
  • Summer period - 88 people / shift (basketball on two platforms and a platform for general physical training).

In the immediate vicinity of the multifunctional site there are temporary modular buildings for trainees, rental and storage of equipment, as well as for the placement of refrigeration and water treatment equipment.

Dressing rooms for trainees are made in the form of two combined container units 6.0x2.4x2.5 m in size each. The buildings have internal and external fine finishing, are equipped with minimal plumbing, technological and engineering equipment. The layout of the premises is organized taking into account the access of people with limited mobility.

The rental building is made in the form of a block container measuring 6.0x2.4x2.5 m. It has an internal and external fine finish, equipped with minimal technological and engineering equipment.

Buildings are equipped mainly with equipment of a domestic manufacturer

The building of water treatment and refrigeration equipment is also represented by block containers.

When designing, the relative position of all temporary modular buildings should be linked as much as possible both in terms of practicality, compactness, manufacturability, and taking into account the places of possible connection to engineering networks.

The novelty of the design solutions of the complex:

  • versatility - the segments included in the complex of a multifunctional site provide an opportunity to play sports in various disciplines, to hold various mass sports events.
  • all-weather, all-weather, the possibility of playing sports at any time of the day;
  • comfort (ergonomics) of stay for those involved in various age groups, including people with limited mobility;
compact planning organization of the site for the complex placement makes it possible to use these planning solutions both in the existing and in the future development.

Heat recovery from the system of refrigeration units for air heating of auxiliary premises.

The energy obtained from the total heat recovery from the refrigeration equipment will be sufficient for all heating. This system will result in energy savings of up to 20%.

Main loads on engineering systems

Power consumption 400 kW (auxiliary rooms, site lighting, refrigeration unit).

Water supply 10 m³/day, city water supply, use of imported water is possible.

Note: The loads are preliminary and should be specified during the development of the Design Documentation stage.

During the development, the following regulatory documents were used and taken into account:

SNiP 42.13330.2011 Updated version. Urban planning. Planning and development of urban and rural settlements (edition 2011);
VSN-1-73 Standards for electric lighting of sports facilities;
SP 31-115-2006 Open sports physical culture and sports facilities;
SP 31-112-2004 Physical culture and sports halls;
GOST 21.508-93 Rules for the implementation of working documentation for master plans for enterprises, structures and housing and civil facilities;
SP 59.13330.2012 Accessibility of buildings and structures for people with limited mobility;
SNiP 118.13330.2012 Updated version. Public buildings and structures.

multifunctional platform

A multifunctional sports ground can be designed on the basis of a hockey court. The universal sports ground will be used throughout the year for training. various types sports on outdoors. A sports ground based on a hockey box can also be used for local level competitions in hockey, basketball, volleyball, mini-football. Therefore, it is necessary to equip the hockey rink with sports equipment: basketball stands, hockey goals, futsal goals, volleyball stands


The hockey court can be turned into a multifunctional sports ground. The board of the hockey rink is made of fiberglass, polyethylene and plywood. Boards for sports fields are best used from fiberglass, as this is the most best material. The board for a hockey box made of fiberglass is made of different thicknesses from 5 to 10 millimeters. The optimal thickness of the fiberglass panel of the hockey board is 7mm, in terms of price / quality ratio. On a fiberglass hockey rink, you can play hockey or practice figure skating in winter time.

And in the summer, the hockey box can be converted to play mini-football, basketball or volleyball

We offer the option of arranging a hockey court into a rectangular sports field. To do this, you only need to change the radius hockey boards to straight hockey boards, as seen in the photos above.

And volleyball. For each of these types combat sports has its own set of requirements for sports equipment, field sizes, type of coverage and markings. If we consider each of these games separately, it is not difficult to derive a common denominator for all and, accordingly, the criteria that should be applied to the universal sports ground.

Basketball

A standard basketball court according to FIBA ​​requirements has dimensions of 28 by 15 meters. However, the minimum required by the rules of the game for amateur courts is 25 by 15 meters.

On the playing field there are two shields with baskets and markings established by the rules of the game. All outlines and lines should be of the same color, usually white. The line width according to the standard is 5 centimeters.

Mini football

The minimum dimensions of a mini-football court are 25 by 18 meters.

The standards for drawing lines are the same - 5 cm wide and monochrome.

Volleyball

The standard dimensions of a volleyball court are 18 by 9 meters. The site is divided into two parts, using a meter-wide grid.

Marking is also carried out according to the rules as in basketball and mini-football.

Thus, we can designate the area of ​​​​the universal sports ground, that is, one where all three sports can be practiced. That is, the standard is 20 by 40 meters.

Special attention should be paid to preparing the base for a universal sports ground.

The simplest option is a sand base. To begin with, excavation of soil up to a depth of 20 cm under the sand takes place. After filling it, the surface must be leveled, watered and compacted with a vibrating plate or roller. Internal drainage is used, that is, the earth absorbs moisture. Such a base is used for rubber plates and modular coverings. The costs of such a base must include the costs to maintain its normal operating characteristics.

The concrete base is the most common. It is among the most durable. The thickness of the concrete base should not be less than 10 cm. Often a minimum reinforcement is performed with 5 mm wire with a cell of 150 by 150 mm. The depth of the trough is up to 40 cm. It is filled in layers.

Concrete is laid taking into account the slope for storm water runoff. Bypass drainage is practiced. Self-leveling coatings (waterproof), acrylic, rubber coatings in rolls and artificial grass are used.

Asphalt bases are also fairly common methods of preparing a sports ground. They are also considered quite durable and strong. The depth of the "pit" should be about 30 cm. Sand (15-20 cm), crushed stone (10-15 cm) are successively laid on the ground, and on this "cushion" - as experts call it, a seven-centimeter layer of asphalt.

The crushed stone basis is also used for athletic fields. It all depends on the characteristics of the soil. On sand or gravel, its thickness is minimal, and on clay soils it can reach almost a meter mark.

Each layer must be saturated with water. Then they must be compacted with a vibrating plate or hand roller. To strengthen this type of base, experts recommend installing a curb or curb.

Before you acquire a base for a sports ground, you should consult with the experts who will mount it for you. It is reasonable to do this, since the type of sports equipment, and their layout, depends on the surface. And the choice of the coverage itself is largely influenced by the type of soil on which you are going to place the site, the presence of drains and a host of other circumstances.

The fence for the future sports ground also depends on many factors. There are ready-made welded sections, various sizes, heights, diameters and wire mesh sizes. They are often called panel fences. They are installed both on standard types of universal sports grounds, and are made individually, “custom-made”.

If we are talking about ordering a more durable sports fence, then it is optimal to frame the perimeter with welded metal structures made taking into account the typical size of the site.

And, finally, how to equip a universal sports ground? As we have already said, the dimensions and markings should correspond to the three types of game: basketball, mini-football and volleyball. It is most expedient to immediately take sets of sports equipment for a universal sports ground. Individual basketball stands with complete backboards, volleyball nets with a cable and fasteners, and football goals with a solid or prefabricated crossbar are widespread. However, you can also order a sports ground "wholesale" - it all depends on the financial capabilities of the buyer.

TD "New Platform" will take care of your concerns for the preliminary assessment and preparation of the proposed site. The company's specialists will advise you and offer you the most suitable sports equipment for the site. Moreover, experienced employees can perform all turnkey work.

The reputation of Trade House "Novaya Ploshchadka" and the trust of customers are our most valuable capital. Don't delay decision on the back burner and order a universal

The full physical development of the younger generation and adults is impossible without active occupation sports. Multifunctional outdoor sports grounds offered by our company allow you to engage in various sports games (football, volleyball, basketball).


Today, children spend a lot of time in a sitting position: at a desk at school, at home at a computer - the arrangement of sports grounds will help to effectively solve the problem sedentary image life. School and yard sports grounds attract children and teenagers to outdoor activities, making it possible to free time with benefit. Universal outdoor sports grounds offer the opportunity to play sports with the whole family, arranging fun starts, team competition, holding football, volleyball, basketball competitions.

Universal playgrounds for sports games

The construction of outdoor sports grounds creates additional features for sports games and spending time outdoors, when a walk is combined with physical activity.


Completion of yard and school sports grounds is carried out depending on the wishes of the customer, which allows you to choose not only the most suitable equipment for future visitors to the site, but also to form offers in different price categories.

Universal sports grounds in the yards are a fairly compact solution, while children get the opportunity to play in a specially equipped, safe place. A universal sports ground in a school, in the yard, on the plots of private houses or public parks is additional way for the child to express themselves by engaging in safe and beneficial physical development types of activity.

Manufacture of sports grounds - quality and safety of products

What do kids like? Convenience, the ability to move and splash out energy, the beauty of the surrounding space. What do parents like? Safety, reliability and quality. Being engaged in the construction of sports grounds, our company brings to life the wishes of both adults and children.

Sports grounds comply with all modern standards and state standards for flat sports facilities for mass activities physical culture. All outdoor sports grounds have a certificate of conformity.


Universal sports ground

This section presents universal children's and youth sports grounds, which produced and assembled by our company.
All of them can be made any size according to your assignment. All characteristics of fences,
equipment and specifications sports equipment can be adjusted
according to your wishes.

Universal children's and youth sports ground

The site is universal, as its characteristics allow year-round use in each yard for various outdoor sports.
Designed for playing football, basketball, volleyball and other sports games, as well as for gymnastics. Meets all modern requirements
imposed on flat sports facilities for mass physical education. The capacity of one site is up to 60 people per hour.

Compact gymnastic (5x22m) and play area (11x22m) can be changed in size. The basis under a platform is also covered with one of types of a sports covering.
Shell set gymnastic zone allows you to perform exercises for people of different age groups on all major muscle groups. Play area is fenced
with built-in futsal goals, basketball posts with fiberglass backboard For open areas, anti-vandal ring with a chain.
The fence is at least 1.5 m high, and at the ends - 3-4 m. Provided artificial lighting. All elements of the site are painted
in various colors with resistant anti-corrosion paint, enlivening with its range the most gray standard microdistrict.

During the construction of outdoor sports grounds, we offer a full range of works:
sports flooring installation, fencing installation, lighting installation, sports equipment And tribune.

To calculate the cost of arranging such a site and get an estimate, contact the company's office and a specialist

The base of the site is asphalted or concreted and can be covered with one of the types of sports surfaces, such as: modular from plastic elements
bulk based on crumb rubber. The size of the playing area is 11x22 m., or any according to your request.
The gymnastic area can also have an asphalt or concrete base.

The following equipment can be installed on it:
hand walker
bars
swedish wall
three-level crossbar
benches
gymnastic beams
press bench
tennis table
workout equipment

It can also be set any other outdoor equipment. The size of the gymnastic area is 5x22 m., or any according to your request.
Having small dimensions, the playground can be easily placed in the courtyard of a residential building or on the school grounds.

Click on the picture to go to the catalog

The base of the platform is covered with a bulk coating based on crumb rubber.

Click on the picture to go to the catalog

The base of the site is covered with bulk coating "granite screenings".

Sketches of fencing structures made of chain-link mesh, welded from a profile pipe and from a welded mesh with a square cell

The sports ground fencing can be made of two types of sections:
1. Filled with netting nets.
The sections are framed steel profile pipe 40x20 painted with outdoor enamel PF115 or polymer powder paint
with firing in a kiln filled with galvanized wire mesh.
2. Welded steel profile pipe.
The sections are a frame made of a steel profile pipe 40x20 and filled in the form welded grating from a steel pipe 20x20. Sections painted with enamel
for outdoor work PF115 or polymer powder paint with kiln firing.
Sections are installed on pillars made of steel profile pipe 40x80 or 80x80 painted with enamel for outdoor use PF115 or polymer
powder paint with kiln firing. The height of the fence can be from 1.5 m to 4.0 m.

We build various types of bases and offer various surface coverings


Universal sports grounds